Page11
Refurbishing the Suspension, April - July 2011
Continued from Page 10 - updated 03/08/2011.
Most of Wed 4/05/11 was spent removing the old nearside suspension.
It was very tricky removing the old brackets & fitting the new ones, the old arm through a hole in sill problem. The outer ones are the worst. It was easier in the origional car build as there were no seats in the car.
Thu 5/05/11 we started carefully to fit our Mk4 suspension to the nearside rear.We are pleased with the tyre/wheel clearance which we have achieved.
Starting to fit our Mk4 arms
Nearly there.
Offside Suspension & update at bottom of page.
We now turned our attention to the offside suspension.Fri 06/05/11 removed old offside rear suspension, this side was a bit easier as the access hole was further to the rear along the sill.
Sat 07/05/11 We got the parts out to fit the offside rear suspension - hit a snag, one of the eccentric adjusting bolts had been damaged by the previous owner, it had been fitted incorrectly & must have come loose whilst being driven. The eccentric washer had not been fitted into the mounting bracket - see photo of damage. Had to get a new one from Lookers Ford agent (they are used on the rear suspension of a year 2000 Mondeo).

You can also see that we had to fit a new alternator at the beginning of April 2011.





==============================
Local made springs now fitted, look OK. (no photo)
Sat 09/07/2011, car went for MOT, Passed, comments were - slight exhaust leak at flexible joint connections. Too much wear in front bottom shock bushes - these were new from AVO & car has not been driven. They were too soft & origionals have been refitted, awaiting tax disc so that a road test of new rear suspension can be carried out.
16/07/2011: Road test carried out today, including a short trip on the M1, feels OK. Simon is pleased with the result despite the highs & lows we have had during the rebuild/modifications. We have our Mk4 arms.
03/08/2011: We have a knock problem at extremes of cornering, e.g. on roundabouts, we suspect soft sloppy Avo bushes at top end of suspension (simlar to front bottom, as above), created mould out of aluminium going to mould our own bushes.
Useful links: More free website templates | Themes for WordPress | Variant Duo template page
.
